[From the Questions: How do I make my display look impressive? What are some things I need to know about displaying?]
Here are some hints and tips for displaying & transporting your exhibits at LEGO fan events or displays:
1) Always ensure your display is labelled with an Exhibit Info Card (aka MOC Card, Info Card etc) so people know who is responsible for the build. If everyone is printing in colour, you should aim to do that too. Some events will supply a standard stand for you. For others, you will need to purchase a stand. Check with the event organisers if they haven’t already mentioned it.
2) If you have a group of collected exhibits, only use one card for the whole layout/display and not one for every single item. For example: a group of spaceships by the same person could be called “The Galactic Armada” rather than naming each ship. This request is to prevent your display looking cluttered with Exhibit Info Cards which may detract from the actual models.
3) Try not to put too much on your display. If possible, link items together in a diorama rather than it just being a display of models. Using the spaceship example again, rather than having individual spaceships, create a space base or a hanger so there is some cohesion between the models. Make sure there is plenty of space between each model. Don’t try to fill every bit of your table with lots of models. If you put too much on your display, nobody will be able to focus on the detail of each model.
4) If possible, give your display some height so it is visually appealing. This might be via a mountain side if building a landscape or via some form of small plinth or stand if displaying individual models. There are many ways this can be achieved and it will make your display stand out and draw the attention away from those that are all the same height.
5) Make sure your exhibit is clean and has most of the dust removed. People will notice the dust. A paint brush or make up brush are good dusting tools. Try to do this before you get to the venue.
6) Ensure your display looks tidy throughout the weekend. Avoid leaving coffee cups and drink cans on the table. Check your display every few hours to see if anything has fallen over or needs repairing etc. Although most patrons are usually pretty good, it is easy to bump a table and disrupt a display.
7) If you are worried about a particular minifig being on your display because it is valuable, then don’t display it.
8) Where possible, avoid placing items close to the edge of your display. If your display goes right to the edge of the table, consider requesting a second table so your display can comfortably sit on the tables without having to worry about it being bumped.
9) When transporting exhibits, make sure they are securely packed in a strong box. Custom made boxes often work best with large exhibits. We recommend the use of plastic wrap (glad wrap or specialised postal/pallet wrap) to hold the model together and bubblewrap to avoid bumps in transit. It also helps to place smaller models in individual ziplock bags. Do not trust that a model will survive in the back seat of your car or an ordinary suitcase.
10) For larger exhibits, we recommend modularising the build so it is easier to transport.
2 thoughts on “Some hints and tips for displaying your creation at a LEGO fan event”
Some really good points and ideas, here Sue Ann. Answers some good questions and some issues we might not have considered before we are in the situation.
THANK YOU! This is a very good guide, especially the bit about adding height, that really attracts the eye!